A Port Worker

We can mass produce the suite of Carbon-free Fuels from any wastewater or seawater anywhere on the globe without creating harmful emissions or waste byproducts.

Carbon-free Fuel Production and Use

We are currently starting production for the Marine industry, in alignment with the International Maritime Organization (IMO) 2020 plan and the powerful clean shipping coalition associations to reduce air and water pollution.  Our solution is the complete package. It is simple, easy to use, cheap, and quick to implement anywhere, making us by far the most cost-effective and viable option.    

Our footprint is very small, while our output production capacity is extremely high.

We can mass produce the suite of Carbon-free Fuels from any wastewater or seawater anywhere on the globe without creating harmful emissions or waste byproducts, such as brine discharge. Our footprint is very small, while our output production capacity is extremely high. The 40-foot modular fuel production systems can produce 5 million to 10 million U.S. gallons per day, and they can be configured for higher volume if necessary. Each system has a multi-fuel capability, enabling it to produce carbon-free fuels for replacing diesel, bunker oil, gasoline, natural gas and Liquefied Natural Gas (LNG), jet fuel, and others, from a single location.

For marine operations

For marine operations, equipment intakes seawater into seagoing production vessels as feedstock and manufactures the fuels on a demand basis. Land-based systems are available when required, using wastewater or other adequate water supply as feedstock. The systems and facilities are operated by EPC contractors, and full fuel specifications and performance are guaranteed for each fuel type. The carbon-free fuels have a slightly higher gross caloric value than the fossil fuel they are mimicking, and sufficient lubricity, solving the low sulfur lubricity issue.

These Carbon-free fuels are safe to transport, store, and handle.

 

They are safe if swallowed or come into contact with your skin or eyes, as they are made from purified water, and have most of the same chemical characteristics of water. However, they do not freeze, and they will mix directly with the intended fossil fuel they are made to blend with or replace. They will not ignite or explode under normal atmospheric conditions. They only become and act as a fuel under the internal operating conditions of an engine. If they are blended with other fossil fuels, the normal safety handling of that fuel is required.

This Carbon-free Fuel manufacturing produces zero pollutants of any type and has no residues.

 

 

Nothing goes back into the ocean. The only Carbon-free Fuel emissions are water vapor and air upon combustion, which means that they also clean the air when consumed. The process is therefore “carbon negative”; 100% of the carbon from seawater or wastewater feedstock is sequestered and converted, and the carbon already in the air is diluted and reduced by using Carbon-free Fuel, which puts oxygen and water vapor into the air.

These are “drop in” fuels that can either be blended with fossil fuels in any ratio to reduce harmful emissions or be used exclusively as their replacement to achieve a zero harmful emission status.

This will greatly reduce and eventually eliminate harmful emissions, water pollution, and other wastes/pollutants created by the energy industry in drilling, fracking, refining, distribution, and power production, and all forms of fuel-powered transportation.

Drop In Fuels

 

No changes to engines are needed. 

Just add the Carbon-free Fuel and Go Green!